BioGuard Burn-Out 3 is a premium high-powered chlorine shock that is used to quickly eliminate bacteria, algae, and other organic contaminants. This restores the health and clarity of your pool water. Its quick-dissolving granular formula can be used without the fear of the product bleaching vinyl and plaster pools. No need for messy pre-dissolving. Burn-Out 3 also contains clarifiers and filter enhancers to return your pool to its regular clean and clear appearance. Best of all Burn-Out 3 will not leave any bi-products behind that could cause problems with pool chemistry.
Available sizes: 8kg, 11.3kg
How to Use Burn-Out 3:
- Add 100g of Burn-Out 3 for every 10,000L of pool water
- Broadcast 2/3 of the product to the deep end and 1/3 to the shallow end of the pool
- If the water is lower than 70 F (20 C) you will need to premix Burn-Out 3. When doing this, always add Burn-Out 3 to water. Do not add water to Burn-Out 3.
- Leave the pump running continuously for at least a day after adding Burn-Out to the pool
- Test your pool water the next day
- If the chlorine level is at 0ppm, add the same dose of Burn-Out again
DO NOT USE BURN-OUT 3 WHILE SWIMMERS ARE IN THE POOL
Wait until chlorine levels are below 6ppm before allowing swimmers into the pool
Tips for Using Burn-Out 3
- If you are dealing with algae, read our How to Remove Green Algae from a Pool page to see how Burn-Out 3 will help get rid of algae
- If your pool temperature is under 70oF, premix Burn-Out 3 to ensure there is no staining