Description

This extra large-sized hot tub Jet E3 Snap-In Directional Generic is compatible with tubs that have “snap-in” fittings including Beachcomber Hot Tubs from November 1999 – December 2010 (serial codes beginning with letters A to L). The directional nozzle is adjustable to customize the position. You can also adjust the jet pressure by opening and closing the jet with a ¼ turn clockwise (to close) or counter clockwise (to open). Measures 5” across the face. Colour/Finish: Grey Plastic

Other Compatible Jet Options:

• Jet E3 Snap-in Roto Britewerx
• Jet E3 Snap-in Massage Britewerx

Note: This jet is not compatible or interchangeable with the RFM series 5”- 5 ¼” jets.

Size Comparison Guide:

AJ – 2”-2 ¼” across the face, small

E1 – 3”-3 ¼” across the face, medium

E2 – 3.5” across the face, large

E3 – 5”- 5 ¼” across the face, extra large

RFM – 5”- 5 ¼“ across the face, extra large

Neck Jet Grey – 2 5/8” across the face

Neck Jet Britewerx – 3 ¼” across the face

Tip:

To remove, twist counter-clockwise about ¼ turn until it stops (jet is now in the open position). Then apply additional force to keep turning until the jet unlocks and pops forward. Do not pull the jet out until it is unlocked. To install, line up the jet tab (grey on the face underside) to the channeled groove in the hot tub wall fitting ring, then push forward until you hear/feel it snap and lock in. Check for the ¼ turn open and close motion to verify the jet is installed correctly. Always ensure the old jet is completely removed before installing the new one.

Please contact us prior to purchasing your jets if you have any questions so we can help you select the correct ones.

Learn more about hot tub jets here